Solution Maintenance Technician - 1st Shift (Wed-Sun)
Lincoln Industries
- Lincoln, NE
- Permanent
- Full-time
- Reads traveler to determine the optimum process for the designated part to be plated. Follows the traveler process specifications step by step.
- Sets up and controls plating equipment to coat metal object electronically or chemically with chromium, copper, cadmium, nickel, zinc, or other metal to provide protective, decorative or engineering surfaces.
- Monitors process control of all plating and cleaning baths to ensure process in within predetermined parameters.
- Follows established safety procedures and work instructions.
- Measures, marks and masks areas exclude from plating per traveler.
- Operates manual hoist or automatic hoist system for submerging the parts in plating or cleaning baths. This may also be performed by hand.
- Racks parts by hand onto racks using racking work instructions.
- Plates parts using motor driven barrel system.
- May operate electroplating equipment with reverse polarity, known as plating stripper.
- May work with substances defined as hazardous waste, such as chrome sludge.
- Environmental responsibility is our commitment to our communities.
- Proper disposal of waste such as recyclables, standard waste, hazardous waste, etc. is expected.
- Could potentially come in contact and/or handle hazardous chemicals/hazardous waste in containerizing, transporting, testing, or other assigned duties.
- Any other tasks as required fulfilling Lincoln Industries' Beliefs and Drivers.
- Reports to: Area Leader
- Problem solving
- In depth technical knowledge of the line(s)
- Initiative
- Communication
- Continuous Improvement
- Must be able to read, write and comprehend the English language.
- Interpersonal communication skills necessary.
- Ability to interpret a variety of instructions furnished in written, oral, diagram or schedule form.
- Ability to define problems, collects data, establish facts, and draw valid conclusions.
50lbsXLifting
75lbs.XTwistingXTurningXPinchingXGrippingXVibration (including but not limited to)X·Hand Tools·Polishing Lathes·Equipment Usage·Pipe Bending or Cutting EquipmentSquattingXPushing
75lbs.XPulling
75lbs.XStatic WorkXPullingXWorking at Waist-Shoulder LevelXWorking Above Shoulder LevelXWorking In High Far (Reach) PositionXWorking Below Shoulder LevelXTRAINING: Training requirements as defined in the Learning Management System based on the role.24J103C1 of 3 print date: 5/1/2024 6:22 AMThis document is valid 24 hrs from print date. For the most current document go to the LINC