AP Exit Operator

North American Stainless

  • Ghent, KY
  • Permanent
  • Full-time
  • 1 month ago
  • Apply easily
The position of AP3 vacation coverage operator is responsible for all operating functions as listed below. Operation of the AP3 Unit must be understood in total with the focus of utilizing the equipment to meet all the quality and productivity goals as outlined in our quality system. All work instructions must be followed as outlined.DUTIESESSENTIAL JOB FUNCTIONS:
1.) Check schedule of coils to be run to insure correct coil is on the line.
2.) Receive communication from Entry of coil number running and observe for any incoming defects.
3.) Monitor coils in line for steering and defects, correct as necessary.
4.) Work with the Pickling/SKP operator while performing all functions at the SKP/TLU.
5.) Work with the Pickling/SKP/Trim operator while performing set ups on the side trimmer and during the side trimming operation.
6.) Start the coil to the Coiler Reel and insert interleaving paper and cores as per work instructions.
7.) Ensure that there is an ample supply of the correct interleaving paper and cardboard cores readily available.
8.) Properly identify coils exiting the unit as per work instructions and enter all machine sheets.
9.) Follow all prescribed safety rules.
10.) Housekeeping/maintenance work as assigned.
11.) Any other jobs as assigned.QUALIFICATIONSMINIMUM EDUCATION, SKILLS AND EXPERIENCE:Minimum of a High School Degree or Equivalent (GED).PHYSICAL ABILITIES REQUIRED:1.) Mobility: Stand (stationary) - 15%, stand/walk - 45%, walking - 15%, sitting - 25%.2.) Strength and Agility: Lifting - occ. 75#, carrying - occ. 150 ft., push/pull - occ. 75#, climbing - occ., balancing - occ., bending - occ., stooping - occ., crouching - occ., kneeling - occ., crawling - occ., running - occ., twisting - occ., turning - occ.3.) Dexterity: Grasping (firm/strong), finger dexterity/handling, reaching.1.) Mobility in plant2.) Ability to lift at least 50 lbs.3.) Visual ability with or without correction4.) Communication ability5.) Ability to work a rotating shift (rotating from days to nights on a weekly or bi-weekly schedule).HEALTH AND SAFETY1.) Work in compliance with the Occupational Health and Safety Act and regulations.2.) Follow Company safety rules.3.) Report the absence of or defect in any protective equipment or clothing to the Supervisor or Manager immediately.4.) Use or wear the equipment, protective devices or clothing that is required to be used or worn:· Safety shoes· Safety glasses· Hearing protection5.) Report to the Safety Coordinator, Group Lead or Supervisor any contravention of the Occupational Health and Safety Act and Regulations or Company policy.6.) Must follow all Lock out Tag out (LOTO) guidelines for designated machines.7.) Maintain a clean and safe work area.WORK ENVIRONMENT:1.) Work in compliance with the Occupational Health and Safety Act and regulations.2.) Clean, well ventilated and safe work areas.

North American Stainless